一种基于实时几何测距的船桥主动防撞方法

本文提出一种基于实时几何测距的船桥主动防撞方法。该方法对船的改动量甚微,仅需维持多项距离矩阵,通过告警逻辑矩阵进行展示与告警,能起到很好的船桥防撞提示效果。     

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

高湿黏性颗粒在聚四氟乙烯微孔膜滤料表面沉积特性的数值模拟

基于聚四氟乙烯(PTFE)微孔膜滤料扫描电镜(SEM)图像，建立PTFE微孔膜滤料微观结构模型，采用计算流体力学和离散单元法(CFD?DEM)耦合的方法对黏性颗粒在微孔膜滤料表面沉积特性进行模拟，引入液桥力模型，忽略范德华力的作用，统计计算域内颗粒的受力情况，分析了不同表面能条件下3~6 ?m粒径颗粒在微孔膜滤料表面的沉积特性，将模拟结果与黏附效率的经验公式进行对比。结果表明，黏附效率与经验值、颗粒受力与液桥力模型的相对误差均在6%以内，CFD?DEM耦合计算方法可用于模拟不同环境湿度条件下的颗粒沉积；过滤风速、粒径与黏性是影响沉积形态的重要因素，提高过滤风速及增大颗粒粒径与黏性，颗粒更易在滤料表面形成稳定的树突结构，黏附效率及含尘压降增加。环境相对湿度影响两物体间液桥体积，接触力影响颗粒沉积，当增加表面能与液桥体积时，接触力及液桥力均相应增加，根据受力平衡原理，环境相对湿度对颗粒沉积影响很大。     

铝金属化纸制备工艺的专利技术发展

通过对铝金属化纸领域专利技术的收集、分析、标引,介绍了铝金属化纸的制备方法及种类,包括铝粉涂布、铝箔纸以及可降解回收的真空镀铝纸等;并对其专利申请量、区域分布以及渡铝技术进行了分析,同时对各技术的发展历程和改进情况进行了梳理归纳。     

Fabrication of novel ZnTe-based photocatalyst: Synergistic effect of dye sensitization and bridge engineering for boosting hydrogen evolution over ZnTe

Herein, a novel ZnTe-based photocatalyst is successfully synthesized via a facile combination of water-bath and hydrothermal processes. Morphology characterization and X-ray diffraction analysis reveal that ZnTe presents irregular granular shape and cubic crystal structure. Moreover, Mott-Schottky measurement shows that the conduction band potential of ZnTe is ?0.84 V (vs NHE). With Eosin Y (EY) sensitization, ZnTe exhibits superior photocatalytic hydrogen evolution activity (223.5 μmol g^?1 h^?1). Meanwhile, WC-ZnTe heterojunction is constructed by depositing ZnTe nanoparticles on bulk WC and obtains the optimal H₂ generation rate (559.1 μmol g^?1 h^?1) under EY sensitization. Electrochemical and photoluminescence results further prove that WC as electron bridge could reduce the interfacial resistance and suppress e^?-h⁺ pairs recombination. This study explores the potential application of ZnTe as a newly active photocatalyst in photocatalytic water splitting, and emphasizes the synergistic effect of dye sensitization and bridge engineering.     

Grain size effect on cyclic deformation behavior and springback prediction of Ni-based superalloy foil

In order to clarify the influence of grain size on cyclic deformation response of superalloy sheets and springback behavior, cyclic loading–unloading and shearing tests were performed on the superalloy foils with 0.2 mm in thickness and diverse grain sizes. The results show that, the decline ratio of elastic modulus is weakened with increasing grain size, and the Bauschinger effect becomes evident with decreasing grain size. Meanwhile, U-bending test results determine that the springback is diminished with increasing grain size. The Chaboche, Anisotropic Nonlinear Kinematic (ANK) and Yoshida-Uemori (Y-U) models were utilized to fit the shear stress–strain curves of specimens. It is found that Y-U model is sufficient of predicting the springback. However, the prediction accuracy is degraded with increasing grain size.     

Bidirectional energy storage photovoltaic grid-connected inverter application system

A novel topology of the bidirectional energy storage photovoltaic grid-connected inverter was proposed to reduce the negative impact of the photovoltaic grid-connected system on the grid caused by environmental instability. Using the proposed Inverter as a UPS power supply in case of a grid failure, storage electrical energy and regulating the energy delivered to the grid for reducing the pressure on the grid. A new artificial fish-swarm algorithm and variable step voltage perturbation method were presented to track the maximum power point of the solar panels. Analysis was done to reduce the output ripple of the inverter and sinusoidal pulse width modulation (SPWM) was selected to control the inverter. Model simulation was performed using PSpice software to obtain the volt-ampere characteristic curve of the solar panel output. The solar array simulator was used to verify the effect of maximum power point tracking at different light intensities. The study concludes that the maximum power point tracking (MPPT) efficiency of the bidirectional energy storage photovoltaic grid-connected inverter designed was as high as 99.9%. The distortion rate of the grid-connected current waveform was within 2% and the DC current component was less than 0.5%. The output voltage and power were in full compliance with the grid connection standard.     

桥梁新旧盖梁自密实补偿收缩混凝土拼接施工技术

结合兴宁至汕尾高速公路海丰至红海湾开发区段一期工程实际,对新旧盖梁拼接施工技术进行总结。通过施工技术的创新有效解决传统拓宽拼接桥梁中新旧结构的连接问题。该技术方案具有较好的经济和社会效益,可推广至类似工程中应用。     

浅谈压延铜箔光面色差的成因

针对压延铜箔在表面处理过程中光面易出现色差的问题,从设备、工艺、人员操作等方面进行成因探讨,并给出了应对措施。